IMPORTANT NOTE: We realize there is a lot to read here but it’s in everyone’s best interest to read all of the information presented here. This is admittedly a complicated product/service with many facets depending on your vehicle build, mods, warranty status etc. We have tried to make this as comprehensive and easy to understand as humanly possible but if we missed something please drop us a line and ask!
This exclusive ship in service allows for complete 100% factory correct operation of a K2XX Denali cluster (that you can supply or choose to have us supply a brand new unit via the drop down menus) into a non-Denali Truck or SUV with plug and play simplicity and no errors or more importantly NO tamper flags!! This service is 100% custom to your vehicle and options and can be tweaked/adjusted for mods such as added OEM navigation, added front park assist, HUD hardware retrofit as well as parts removed such as magnetic ride etc. This service when done in the recommended manner (matching vehicle year/content) is 100% warranty compliant.
PLEASE NOTE: If we are supplying the hardware it is special order and subject to lead time as there are just so many different configurations it would be difficult to stock them all. Please make sure you triple check your selected cluster before checking out.
Q: How does this work?
A: You can choose to have us supply the 100% correct OEM Brand New cluster by using the drop downs above OR you may choose to source a new or used cluster. If you choose to go the used route you first figure out your application (E.G. Gas US Spec and model year) and using the parts list linked below you source the appropriate cluster (new or used). If you wish to have 100% OEM functionality AND retain your factory or factory backed extended warranty you MUST use the same model year cluster as your truck; the ONLY exception to this is if you have had us do the proper car play retrofit programming using modules on our supported list. Then and only then may you use a 2016 Red or Blue gas part number; please note there is NO part number for a 2016 Blue DIESEL BUT we have developed a way to retrofit a 2017 for proper operation. After you source your cluster you should email us using the contact us button on our website for a final fitment check supplying your VIN and part number of the cluster just to triple check everything is good (if you used the list below and follow these instructions you should be golden). You then place an order (please pay attention to the cluster condition option(s)!) and follow the shipping instructions provided. Upon return simply plug the unit in and you’ll be golden; yes it’s really that simple.
Q: I have a 2015 truck how do I tell if I have a 2015 or a 2015.5
A: If you have RPO (on your build sticker likely in your glove box) AVF OR VV4 you will utilize the 2015.5 part numbers.
Q: Can you do this for Export (Metric clusters)?
A: Yes we can and we can supply them as well via the drop down.
Q: Can you program an Escalade cluster to work?
A: Yes provided we match the model year just like the Denali HOWEVER the unit itself is more expensive, does not fit the cluster opening properly, coloring doesn’t match, costs considerably more to program and does not meet the warranty criteria; if you really want it we are happy do it but we generally advise against It for those reasons.
Q: Does it HAVE to be the same model year of cluster as my truck?
A: If you wish to have 100% OEM functionality AND retain your factory or factory backed extended warranty you MUST use the same model year cluster as your truck; the ONLY exception to this is if you have had us do the proper car play retrofit programming using modules on our supported list. Then and only then may you use a 2016 Red or Blue gas part number. If you are out of warranty and understand the potential downside(s) and still want to use a mismatched cluster you will need to agree to that when choosing your configuration above. Please contact us prior to ordering so we can confirm which cluster you are looking at and your build to see what you may run into.
Q: I want to do the 2016 cluster retrofit into a 2014-2015.5 so that I can get a Blue/Green Cluster in my Silverado and get the steering wheel controls back inside Car Play/Android Auto; what do I do?
A: Contact us and let us know which HMI and Radio you used and we can go from there. If you did a Car Play retrofit through us using the best practices list we provide you can utilize any of the 2016 Part numbers that match your application/coloring. If you have a Chevrolet Diesel please contact us to go over how we can make the proper colored cluster work in your application.
Q: I did a car play retrofit and don’t have some steering wheel controls inside of Car Play/Android Auto; can you help me?
A: Yes but there is a specific list of compatible components and we need to do the programming on the other modules to make sure everything is 100% perfect. If you plan on doing the CP/AA upgrade at any point it’s best to try to do it all at the same time to save yourself a potential headache.
Q: Will I lose any features?
A: No you should not lose any features that you had before.
Q: Will I gain any features?
A: You may gain some features as the Denali clusters have slightly different menus. We can also enable things you have added such as indicators for front park assist or the Navigation menu if you have added factory navigation. If you have added FACTORY options that your truck didn’t have please put what you have added in the notes section.
Q: Can you delete warning indicators for items I may have removed from the Vehicle??
A: Yes we can, this would all be custom and priced as such, contact us for details.
Q: What is the HUD Retrofit Option?
A: This enables the unit to drive a heads up display. Yes it can be installed no we do not provide support for that end of it but there is a fantastic write up on gm-trucks.com as well as harness from Pgamboa (Phil Gamboa) Please make sure you are choosing a cluster that has a HUD output if you think you are going to do this mod.
Q: What is the Odometer Lock Option?
A: The Odometer lock option removes the odometer hard lock from a cluster that has been tampered with or improperly installed (Odometer Showing ——).
Q: What about my engine hours?
A: The Denali cluster shows total running hours as well as idle hours. The base clusters only display total running hours. We reset both fields to zero as part of this service however if you truly want the total running hours programmed we can do that as well just let us know.
Q: Do I need to send in my factory cluster?
A. No, we only need you to send the Denali cluster you are sourcing (if you are choosing to supply it)
Q: Where is the transmission temp gauge now?
A: Its automatically displayed when in tow haul mode.
Q: Why is my Silverado showing a SUV icon for some things?
A: This allows you to utilize the Chevrolet branding and startup screen whereas to keep the pickup truck icon it would have been GMC/Denali themed. We have yet to have a Chevrolet customer who DIDN’T want the Chevrolet startup so this is how we set them up.