Are you sick of having a beautiful touch screen radio that does little more than AM/FM and play CD’s? So were we! With the WAMS exclusive PPV radio programming you can have the radio your car deserves!
Bluetooth for Phone With Phonebook Download and Voice Command/Siri Access
Bluetooth Streaming Audio
Bluetooth Pairing of External Devices IE GPS systems for Voice Routing
USB Audio Support (requires customer sourced USB cord; see note below)
iPod/iPhone support (requires customer sourced USB cord; see note below)
Rear Auxiliary Input (requires customer sourced aux in plug; see note below)
Video Input (requires customer sourced aux in plug; see note below)
Backup Camera input with Guidelines (requires customer sourced aux in plug; see note below)
In motion Lockouts (IWM/VIM) Removed for Video Input/Phone/Navigation
VIN Transfer Programming for a used radio to a new vehicle
NOTE: If you need any of the above cables to complete your install Steve Walker has you covered! Please click HERE for more information.
If you have a 2013 vehicle there is a chance the connector on the radio side for the Aux In/Rear camera may be missing. If that is the case you will have to solder your harness directly to the board of the radio. You can find instructions on completely this process in the Stereo/Electronics section of newcaprice.com
Please note it is ONLY necessary to send your radio silverbox to us now for programming; no need to send the faceplate or any other hardware for this service. Before shipping your silver box PLEASE make sure you set the climate control to a comfortable temperature and on AUTO mode so you can continue to drive the vehicle. Please also note that as described above USB support requires a cord and bluetooth phone integration may require a microphone depending on how your car was built; we only supply programming we do not have aux or USB cables for these units.